Tag Archives: What is the top speed of a 180cc kit YZF-R125

YZF R125 180cc kit top speed

TL;DR: Top speed I’ve managed (so far) on my gen1 with 180cc kit, 160cc injector and longer duration cam, with PCV + Autotune/wideband: 89mph at which point we’re still on power but bouncing off the rev limiter.

Please note: just raising your RPM limit may not be wise and may destroy your engine, especially on a 180cc kit since it changes the engine’s internal balance factor. I’m doing it here because I’ve built this engine a certain way which means the power band actually comes in a little higher than stock, so when we were hitting the limiter before we were still very much in the power band, and the engine wasn’t shaking or sounding unhappy, in fact it was smooth and in “mechanical harmony” (best way I can describe it). You can probably go a little higher on a stock engine (e.g. 500rpm) but mine is most definitely not a stock engine, so don’t try this at home kids, unless you know what you’re doing.

Info re RPM limiter coming direct from the ECU. The box we’re looking at is on the right where it shows the high limit is 10.1k, not 10.5K as is often (wrongly) assumed. My tacho showed 10.5k as the limiter, but apparently it also isn’t that accurate.

So I’ve noticed there’s people searching on this topic so I’ll share what I’ve discovered so far, hopefully it’s of some use.

Top speed on mine when I got it, as 125cc on stock 14t sprocket was 83mph (indicated). That was absolutely throwing-it-down-a-hill-with-the-wind-behind-you, the most I could get out of it. 83 seems to be a fairly common top speed for stock bikes. Some other people have claimed 86 out of a stock bike but I can’t verify that myself and that wasn’t my experience and speedo variations could account for the difference.

Continue reading YZF R125 180cc kit top speed