Tag Archives: scootershack

Stretched Yamaha Neos updates…

Here are a few pics from recent progress…

I’ve been working on trying to get it as “together” as possible, all trim, bodywork and stuff, before putting the floor bars on to get the best idea of how to do them. I think now I know what I’m supposed to be doing and now just have to actually get them in. Hopefully I’ll get into that this week, weather permitting.

The back rides up when there’s no weight on it which makes it look a little odd, but when you’re on it, it all lays flat and lines up right.

The last pic is with me sat on it as you can hopefully see  then both the rear mudguard and the exhaust come into alignment. It’s very, very long for a scooter but looks to be headed the sort of direction I was hoping (japanese “big scooter” style).

Continue reading Stretched Yamaha Neos updates…

Extending the exhaust on the Neos

Now that the rear suspension is sorted I was able to figure out the positioning of the exhaust. Obviously with adding offset and the wider wheel the exhaust needed a little bit of “editing” to clear the wheel. Was a bit nervous about messing this up but it actually went ok.

Continue reading Extending the exhaust on the Neos

Rebuilding the rear suspension on the NEOS

So the air ride sorta worked but I wasn’t happy with the reliability, and that’s not something I’d want to fail at speed.It was holding up the rest of the project so I decided to go with a regular shock on the back for the time being and come back to the air later.

Continue reading Rebuilding the rear suspension on the NEOS

Testing the air suspension on the Neos

In this video I’m testing the air suspension setup. Not sure quite what the final format of it will be – there’s still a fair bit of experimenting at this point.

Full build thread to date HERE

 

Yamaha NEOS 2002 stretched / “fatty” build – part 4 – The stretch

 

This is part 4 of my catchup videos showing progress on my fatty/stretched yamaha Neos project.

In this video I’m building the stretch frame which should give the scooter that stance I like so much.

Continue reading Yamaha NEOS 2002 stretched / “fatty” build – part 4 – The stretch

Yamaha NEOS 2002 stretched / “fatty” build – part 3 – Fitting the mini-classic rim

This is part 3 of my catchup videos showing progress on my fatty/stretched yamaha Neos project.

In this video I’m going through the process of mounting the rim from an Austin Mini Classic with a scooter tyre stretched onto it, to the yamaha driveline.

I ended up trying two different approaches, I’ve left the mistakes in since perhaps it might help you or someone else figure out how to (or not to) do something similar.

The bike is a 2002 Yamaha Neos, 2 stroke, 50cc Minarelli engine in a stretched, “fatty” style. It’s a regular yamaha scooter with much of the plastics removed, 7×12″ rear rim from a mini-classic, it’s stretched by 18″ and lowered, on air-ride.

This bike is actually coming together now so I thought I’d post a bit of a catchup sequence. It’s ended up being several parts though covering the main challenges I’ve had with it so far.

Thanks for watching, next part to follow shortly, please LIKE and SUBSCRIBE to see more 🙂

Full build thread to date HERE

Yamaha NEOS 2002 stretched / “fatty” build – part 2 – Fuel sender modification

This is a quick catchup clip for my yamaha neos 2002 stretched “fatty” build. It’s a regular yamaha
scooter with much of the plastics removed, 7×12″ rear rim from a mini-classic, it’s stretched 18″ and
lowered, on air-ride.

This bike is actually coming together now so I thought I’d post a bit of a catchup sequence. It’s ended
up being several parts though.

This is the second part. By this point I’ve done most of the wiring, this clip deals with modifying the
fuel sender to work with the aftermarket tacho/gauge…which ended up being quite fiddly, but worthwhile
if you want the fuel gauge to work properly.

Thanks for watching, next part to follow shortly, please LIKE and SUBSCRIBE to see more 🙂

Full build thread to date: https://www.scootershack.co.uk/threads/yamaha-neos-50cc-build.37580

 

More info, contact and other projects at:
https://northcust.co.uk/

Yamaha NEOS 2002 stretched / “fatty” build – part 1

 

This is a quick catchup clip for my yamaha neos 2002 stretched “fatty” build. It’s a regular yamaha scooter with much of the plastics removed, 7×12″ rear rim from a mini-classic, it’s stretched 18″ and lowered, on air-ride.

This bike is actually coming together now so I thought I’d post a bit of a catchup sequence. It’s ended up being several parts though.

This is the first part which goes from arrival of the bike, a bit of an overview of roughly where I’m heading with it and a look at some of the components.

Then we’re on to stripping the bike down and figuring out what to do with the front part of the frame so that I can get the look that I want.

Thanks for watching, next part to follow shortly, please LIKE and SUBSCRIBE to see more 🙂

Full build thread to date HERE